Log In
Sort By

Arctic Cat M8 SNO PRO 162

Premium
Nearest
Recent
High $
Low $
Newest
Oldest
Loading your results...
2019 Arctic Cat M 8000 SNO PRO (162), AWARD-WINNING ASCENDER PLATFORM WITH LIGHTWEIGHT ASCENDER BODYWORK The 1.125-inch dropped driveshaft features an increased track-to-tunnel clearance of 3 inches allowing us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, side hilling and boondocking. 8000 C-TEC2 ENGINE WITH DSI The 8000 — efficient, responsive and fresh out of St. Cloud, Minnesota. This 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 8000, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-HP class. 1.125" DROPPED DRIVESHAFT The 1.125-inch dropped driveshaft features an increased track-to-tunnel clearance of 3 inches allowing us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, side hilling and boondocking. ARCTIC MOUNTAIN FRONT SUSPENSION WITH FOX FLOAT 3 SHOCKS Lightweight, forged-aluminum spindles have less surface area, reducing drag and improving performance in deep snow. Dual-phase high-strength alloy-steel A-arms are also extremely lightweight. FOX FLOAT® 3 air shocks feature easy air valve access, simplifying air pressure adjustment for customizing ride control. They are calibrated for comfort and control in deep snow, through bumps and on the trail. FLOAT-ACTION REAR SUSPENSION WITH FRONT ARCTIC CAT IFP 1.5 AND REAR FOX FLOAT 3 SHOCKS FLOAT-ACTION Rear Suspension features optimized front arm and rail geometry that delivers a premium ride, maximum travel and consistent track tension. In addition, you get the lightweight, ride-mastered performance of FOX FLOAT® ski shocks and Arctic Cat® IFP 1.5 gas front track shocks. ARCTIC MOUNTAIN DRIVE SYSTEM The Arctic Drive System features CVT drive and driven clutches for a combination of smooth shifting, optimal performance, maximum durability; great serviceability; and reduced weight. The new drive clutch features a roller bearing on the shaft that enables an auto-adjusting belt tension design and deliver
$13,699
Babbitt's Sports Center
Muskegon, MI
Stock Number: 092001
2019 Arctic Cat M 8000 SNO PRO (162), AWARD-WINNING ASCENDER PLATFORM WITH LIGHTWEIGHT ASCENDER BODYWORK The 1.125-inch dropped driveshaft features an increased track-to-tunnel clearance of 3 inches allowing us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, side hilling and boondocking. 8000 C-TEC2 ENGINE WITH DSI The 8000 — efficient, responsive and fresh out of St. Cloud, Minnesota. This 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 8000, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-HP class. 1.125" DROPPED DRIVESHAFT The 1.125-inch dropped driveshaft features an increased track-to-tunnel clearance of 3 inches allowing us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, side hilling and boondocking. ARCTIC MOUNTAIN FRONT SUSPENSION WITH FOX FLOAT 3 SHOCKS Lightweight, forged-aluminum spindles have less surface area, reducing drag and improving performance in deep snow. Dual-phase high-strength alloy-steel A-arms are also extremely lightweight. FOX FLOAT® 3 air shocks feature easy air valve access, simplifying air pressure adjustment for customizing ride control. They are calibrated for comfort and control in deep snow, through bumps and on the trail. FLOAT-ACTION REAR SUSPENSION WITH FRONT ARCTIC CAT IFP 1.5 AND REAR FOX FLOAT 3 SHOCKS FLOAT-ACTION Rear Suspension features optimized front arm and rail geometry that delivers a premium ride, maximum travel and consistent track tension. In addition, you get the lightweight, ride-mastered performance of FOX FLOAT® ski shocks and Arctic Cat® IFP 1.5 gas front track shocks. ARCTIC MOUNTAIN DRIVE SYSTEM The Arctic Drive System features CVT drive and driven clutches for a combination of smooth shifting, optimal performance, maximum durability; great serviceability; and reduced weight. The new drive clutch features a roller bearing on the shaft that enables an auto-adjusting belt tension design and deliver
$13,699
Babbitt's Sports Center
Muskegon, MI
Stock Number: 092002
2019 Arctic Cat M 8000 SNO PRO (162), AWARD-WINNING ASCENDER PLATFORM WITH LIGHTWEIGHT ASCENDER BODYWORK The 1.125-inch dropped driveshaft features an increased track-to-tunnel clearance of 3 inches allowing us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, side hilling and boondocking. 8000 C-TEC2 ENGINE WITH DSI The 8000 — efficient, responsive and fresh out of St. Cloud, Minnesota. This 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 8000, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-HP class. 1.125" DROPPED DRIVESHAFT The 1.125-inch dropped driveshaft features an increased track-to-tunnel clearance of 3 inches allowing us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, side hilling and boondocking. ARCTIC MOUNTAIN FRONT SUSPENSION WITH FOX FLOAT 3 SHOCKS Lightweight, forged-aluminum spindles have less surface area, reducing drag and improving performance in deep snow. Dual-phase high-strength alloy-steel A-arms are also extremely lightweight. FOX FLOAT® 3 air shocks feature easy air valve access, simplifying air pressure adjustment for customizing ride control. They are calibrated for comfort and control in deep snow, through bumps and on the trail. FLOAT-ACTION REAR SUSPENSION WITH FRONT ARCTIC CAT IFP 1.5 AND REAR FOX FLOAT 3 SHOCKS FLOAT-ACTION Rear Suspension features optimized front arm and rail geometry that delivers a premium ride, maximum travel and consistent track tension. In addition, you get the lightweight, ride-mastered performance of FOX FLOAT® ski shocks and Arctic Cat® IFP 1.5 gas front track shocks. ARCTIC MOUNTAIN DRIVE SYSTEM The Arctic Drive System features CVT drive and driven clutches for a combination of smooth shifting, optimal performance, maximum durability; great serviceability; and reduced weight. The new drive clutch features a roller bearing on the shaft that enables an auto-adjusting belt tension design and deliver
$13,999
Babbitt's Sports Center
Muskegon, MI
Stock Number: 092003
2019 Arctic Cat M 8000 SNO PRO (162), AWARD-WINNING ASCENDER PLATFORM WITH LIGHTWEIGHT ASCENDER BODYWORK The 1.125-inch dropped driveshaft features an increased track-to-tunnel clearance of 3 inches allowing us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, side hilling and boondocking. 8000 C-TEC2 ENGINE WITH DSI The 8000 — efficient, responsive and fresh out of St. Cloud, Minnesota. This 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 8000, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-HP class. 1.125" DROPPED DRIVESHAFT The 1.125-inch dropped driveshaft features an increased track-to-tunnel clearance of 3 inches allowing us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, side hilling and boondocking. ARCTIC MOUNTAIN FRONT SUSPENSION WITH FOX FLOAT 3 SHOCKS Lightweight, forged-aluminum spindles have less surface area, reducing drag and improving performance in deep snow. Dual-phase high-strength alloy-steel A-arms are also extremely lightweight. FOX FLOAT® 3 air shocks feature easy air valve access, simplifying air pressure adjustment for customizing ride control. They are calibrated for comfort and control in deep snow, through bumps and on the trail. FLOAT-ACTION REAR SUSPENSION WITH FRONT ARCTIC CAT IFP 1.5 AND REAR FOX FLOAT 3 SHOCKS FLOAT-ACTION Rear Suspension features optimized front arm and rail geometry that delivers a premium ride, maximum travel and consistent track tension. In addition, you get the lightweight, ride-mastered performance of FOX FLOAT® ski shocks and Arctic Cat® IFP 1.5 gas front track shocks. ARCTIC MOUNTAIN DRIVE SYSTEM The Arctic Drive System features CVT drive and driven clutches for a combination of smooth shifting, optimal performance, maximum durability; great serviceability; and reduced weight. The new drive clutch features a roller bearing on the shaft that enables an auto-adjusting belt tension design and deliver
$13,999
Babbitt's Sports Center
Muskegon, MI
Stock Number: 092004
New Ascender platform with Next-Gen Mountain body panels: The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider’s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling.
$13,699
Route 3A Motorsports
North Chelmsford, MA
New Ascender platform with Next-Gen Mountain body panels: The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider’s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling.
$13,999
Route 3A Motorsports
North Chelmsford, MA
New Ascender platform with Next-Gen Mountain body panels: The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider’s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling.
$13,699
Route 3A Motorsports
North Chelmsford, MA
New Ascender platform with Next-Gen Mountain body panels: The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider’s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling.
$13,999
Route 3A Motorsports
North Chelmsford, MA
Features 1.125" Dropped Driveshaft: Like the 2017 Mountain Cat, this 2018 M 8000 Sno Pro is fitted with the 1.125" dropped driveshaft. The increased track-to-tunnel clearance of 3" allows us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, sidehilling and boondocking. Arctic Mountain Front Suspension with FOX FLOAT 3 Shocks: Lightweight, forged-aluminum spindles have less surface area than the previous design, reducing drag and improving performance in deep snow. Also, dual-phase high strength alloy-steel A-arms are lighter than previous designs. FOX FLOAT 3 air shocks are improved for 2018 with improved ride and handling – with more supple compression in the initial stroke travel – thanks to increased volume on the ski shocks via a new body cap and shorter negative spring. FLOAT-ACTION Rear Suspension with Front Arctic Cat IFP and Rear FOX FLOAT 3: Thanks to increased shock length from 16 in. to 17 in. on the rear arm shock, the FOX FLOAT 3 air shock provides smother compression in the initial stroke travel. The FLOAT-ACTION rear suspension’s unique tri-hub rear axle system provides a better ride quality in all conditions. 9000 C-TEC4 Turbocharged Engine: This 200-class HP Turbo Triple 4-stroke engine packs seamless power delivery in order to give you better handling, more ride control and immediate throttle response. Response like this can only come from an innovative compact exhaust manifold that transfers energy with unprecedented efficiency and immediacy. The power-to-weight ratio is untouchable. No other mass-produced snowmobile engine can match this beast’s output. 12V Outlet: Need to charge your phone or another electrical device? We’ve got you covered. Just plug in and power up while you ride. Electric Start: This is just the thing for consistent, reliable starting. A simple turn of the key is all you need to get up and running.
$16,599
Nelsons Speed Shop
Greenville, MI
2018 Arctic Cat M 8000 SNO PRO 3.0 (162), 2018 Arctic Cat® M 8000 SNO PRO 3.0 (162) Features may include: NEW ASCENDER PLATFORM WITH NEXT-GEN MOUNTAIN BODY PANELS The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling. 8000 C-TEC2 ENGINE WITH DSI Introducing the most efficient and responsive 8000 engine from Arctic Cat. Fresh from our plant in St. Cloud, Minnesota, this 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 800, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions, and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-hp class. 1.125" DROPPED DRIVESHAFT Like the 2017 Mountain Cat, this 2018 M 8000 Sno Pro is fitted with the 1.125" dropped driveshaft. The increased track-to-tunnel clearance of 3" allows us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, sidehilling and boondocking. ARCTIC MOUNTAIN FRONT SUSPENSION WITH FOX FLOAT 3 SHOCKS Lightweight, forged-aluminum spindles have less surface area than the previous design, reducing drag and improving performance in deep snow. Also, dual-phase high strength alloy-steel A-arms are lighter than previous designs. FOX FLOAT 3 air shocks are improved for 2018 with improved ride and handling with more supple compression in the initial stroke travel thanks to increased volume on the ski shocks via a new body cap and shorter negative spring. FLOAT-ACTION REAR SUSPENSION WITH FRONT ARCTIC CAT IFP AND REAR FOX FLOAT 3 Thanks to increased shock length from 16 in. to 17 in. on the rear arm shock, the FOX FLOAT 3 air shock provides smother compression in the initial stroke travel. The FLOAT-ACTION rear suspension s unique tri-hub rear axle system provides a better ride quality in all con
$11,990
Adventure Motorsports
Monroe, WA
Stock Number: 101826
atures New Ascender platform with Next-Gen Mountain body panels: The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider’s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling. 8000 C-TEC2 Engine with DSI: Introducing the most efficient and responsive 8000 engine from Arctic Cat. Fresh from our plant in St. Cloud, Minnesota, this 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 800, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions, and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-hp class.
$13,699
Off-Road Express Route 8
Erie, PA
Features New Ascender platform with Next-Gen Mountain body panels: The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider’s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling. 8000 C-TEC2 Engine with DSI: Introducing the most efficient and responsive 8000 engine from Arctic Cat. Fresh from our plant in St. Cloud, Minnesota, this 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 800, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions, and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-hp class. 1.125" Dropped Driveshaft: Like the 2017 Mountain Cat, this Early Release 2018 M 8000 Sno Pro is fitted with the 1.125" dropped driveshaft. The increased track-to-tunnel clearance of 3" allows us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, sidehilling and boondocking.
$13,699
Off-Road Express Route 8
Erie, PA
New Ascender platform with Next-Gen Mountain body panels: The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider’s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7 degree lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling.
$13,699
Route 3A Motorsports
North Chelmsford, MA
1.125" Dropped Driveshaft: Like the 2017 Mountain Cat, this 2018 M 8000 Sno Pro is fitted with the 1.125" dropped driveshaft. The increased track-to-tunnel clearance of 3" allows us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, sidehilling and boondocking.
$16,599
Route 3A Motorsports
North Chelmsford, MA
Features New Ascender platform with Next-Gen Mountain body panels: The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider’s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling. 8000 C-TEC2 Engine with DSI: Introducing the most efficient and responsive 8000 engine from Arctic Cat. Fresh from our plant in St. Cloud, Minnesota, this 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 800, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions, and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-hp class. 1.125" Dropped Driveshaft: Like the 2017 Mountain Cat, this 2018 M 8000 Sno Pro is fitted with the 1.125" dropped driveshaft. The increased track-to-tunnel clearance of 3" allows us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, sidehilling and boondocking.
$13,999
Nelsons Speed Shop
Greenville, MI
2018 ARCTIC CAT M 8000 Sno Pro (162) 3.0, Dealer Demo!!!3.0 Lug 162' Track' If high marking is your game.....this is the sled!!!the torque produced from the NEW 2018 C-Tec Motor is second to none!!!Financing AvailableUT Dealer # 5625 The Edge Power Sports and Performance LLC.14301 South Minuteman Dr. (East frontage road)801-495-3278www.get2theedge.comAll used/consignment machines are sold as is.*Price does not include taxes and fee's. Most trades are welcomed as long as your machine isn't older than 10 years or held together with duct tape or JB weld.... Call for more details!!
$9,499
The Edge Powersports & Performance LLC
Draper, UT
Stock Number: ARC3335
1.125" Dropped Driveshaft: Like the 2017 Mountain Cat, this 2018 M 8000 Sno Pro is fitted with the 1.125" dropped driveshaft. The increased track-to-tunnel clearance of 3" allows us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, sidehilling and boondocking.Arctic Mountain Front Suspension with FOX FLOAT 3 Shocks: Lightweight, forged-aluminum spindles have less surface area than the previous design, reducing drag and improving performance in deep snow. Also, dual-phase high strength alloy-steel A-arms are lighter than previous designs. FOX FLOAT 3 air shocks are improved for 2018 with improved ride and handling – with more supple compression in the initial stroke travel – thanks to increased volume on the ski shocks via a new body cap and shorter negative spring.
$16,599
Route 3A Motorsports
North Chelmsford, MA
New Ascender platform with Next-Gen Mountain body panels: The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider’s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling.
$13,699
Route 3A Motorsports
North Chelmsford, MA
2018 ARCTIC CAT M 8000 Sno Pro (162) Early Release, Take a Look At this Beautiful Machine!!!***Arctic Cat changes the game with the ALL NEW 2018 M8000!!!Used as a Demo by Edge Employees...LOW Miles (Under 400)
$10,499
400 miles
The Edge Powersports & Performance LLC
Draper, UT
Stock Number: ARC1729
Features New Ascender platform with Next-Gen Mountain body panels: The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider’s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling. 8000 C-TEC2 Engine with DSI: Introducing the most efficient and responsive 8000 engine from Arctic Cat. Fresh from our plant in St. Cloud, Minnesota, this 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 800, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions, and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-hp class. 1.125" Dropped Driveshaft: Like the 2017 Mountain Cat, this Early Release 2018 M 8000 Sno Pro is fitted with the 1.125" dropped driveshaft. The increased track-to-tunnel clearance of 3" allows us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, sidehilling and boondocking.
$13,699
Nelsons Speed Shop
Greenville, MI
Features 1.125" Dropped Driveshaft: Like the 2017 Mountain Cat, this 2018 M 8000 Sno Pro is fitted with the 1.125" dropped driveshaft. The increased track-to-tunnel clearance of 3" allows us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, sidehilling and boondocking. Arctic Mountain Front Suspension with FOX FLOAT 3 Shocks: Lightweight, forged-aluminum spindles have less surface area than the previous design, reducing drag and improving performance in deep snow. Also, dual-phase high strength alloy-steel A-arms are lighter than previous designs. FOX FLOAT 3 air shocks are improved for 2018 with improved ride and handling – with more supple compression in the initial stroke travel – thanks to increased volume on the ski shocks via a new body cap and shorter negative spring.
$16,599
Off-Road Express Route 8
Erie, PA
2018 Arctic Cat M 8000 SNO PRO ES 3.0 (162), CLEARANCE SALE... SAVE $1000 ON BRAND NEW 2018 ARCTIC CAT M8000 162" SNO PRO ELECTRIC START. CALL OR COME SEE US TODAY FOR ALL THE DETAILS!!! FOR NEW UNITS Images may show optional accessories not included in price.Prices exclude dealer setup, taxes, title, freight and licensing and are subject to change. A documentation fee of up to $150.00 may be charged. 2018 Arctic Cat® M 8000 SNO PRO ES 3.0 (162) Features may include: NEW ASCENDER PLATFORM WITH NEXT-GEN MOUNTAIN BODY PANELS The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling. 8000 C-TEC2 ENGINE WITH DSI Introducing the most efficient and responsive 8000 engine from Arctic Cat. Fresh from our plant in St. Cloud, Minnesota, this 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 800, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions, and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-hp class. 1.125" DROPPED DRIVESHAFT Like the 2017 Mountain Cat, this 2018 M 8000 Sno Pro is fitted with the 1.125" dropped driveshaft. The increased track-to-tunnel clearance of 3" allows us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, sidehilling and boondocking. ARCTIC MOUNTAIN FRONT SUSPENSION WITH FOX FLOAT 3 SHOCKS Lightweight, forged-aluminum spindles have less surface area than the previous design, reducing drag and improving performance in deep snow. Also, dual-phase high strength alloy-steel A-arms are lighter than previous designs. FOX FLOAT 3 air shocks are improved for 2018 with improved ride and handling with more supple compression in the initial stroke travel thanks to increased volume on the ski shocks via a new body cap and shorter negative s
$12,999
Mt. Baker Moto-Sports
Bellingham, WA
Stock Number: 104405
Features New Ascender platform with Next-Gen Mountain body panels: The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider’s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling. 8000 C-TEC2 Engine with DSI: Introducing the most efficient and responsive 8000 engine from Arctic Cat. Fresh from our plant in St. Cloud, Minnesota, this 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 800, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions, and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-hp class. 1.125" Dropped Driveshaft: Like the 2017 Mountain Cat, this 2018 M 8000 Sno Pro is fitted with the 1.125" dropped driveshaft. The increased track-to-tunnel clearance of 3" allows us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you’ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, sidehilling and boondocking.
$13,699
Nelsons Speed Shop
Greenville, MI
2018 Arctic Cat M 8000 SNO PRO 3.0 (162), 2018 Arctic Cat® M 8000 SNO PRO 3.0 (162) Features may include: NEW ASCENDER PLATFORM WITH NEXT-GEN MOUNTAIN BODY PANELS The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling. 8000 C-TEC2 ENGINE WITH DSI Introducing the most efficient and responsive 8000 engine from Arctic Cat. Fresh from our plant in St. Cloud, Minnesota, this 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 800, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions, and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-hp class. 1.125" DROPPED DRIVESHAFT Like the 2017 Mountain Cat, this 2018 M 8000 Sno Pro is fitted with the 1.125" dropped driveshaft. The increased track-to-tunnel clearance of 3" allows us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, sidehilling and boondocking. ARCTIC MOUNTAIN FRONT SUSPENSION WITH FOX FLOAT 3 SHOCKS Lightweight, forged-aluminum spindles have less surface area than the previous design, reducing drag and improving performance in deep snow. Also, dual-phase high strength alloy-steel A-arms are lighter than previous designs. FOX FLOAT 3 air shocks are improved for 2018 with improved ride and handling with more supple compression in the initial stroke travel thanks to increased volume on the ski shocks via a new body cap and shorter negative spring. FLOAT-ACTION REAR SUSPENSION WITH FRONT ARCTIC CAT IFP AND REAR FOX FLOAT 3 Thanks to increased shock length from 16 in. to 17 in. on the rear arm shock, the FOX FLOAT 3 air shock provides smother compression in the initial stroke travel. The FLOAT-ACTION rear suspension s unique tri-hub rear axle system provides a better ride quality in all con
Request Price
Call For Price
Guy's Outdoor Equipment
Lewiston, ID
2018 Arctic Cat M 8000 SNO PRO (162), NEW YEAR NEW PRICE! NOW $1,000 OFF! SNO PRO!! 2018 Arctic Cat® M 8000 MOUNTAIN CAT (162) Features may include: NEW ASCENDER PLATFORM WITH NEXT-GEN MOUNTAIN BODY PANELS The Ascender platform brings a whole new way to attack the mountain. Running boards are 1 in. narrower than previous designs and the overall profile is 10% narrower for improved side-hill performance, improved venting and ease of laying the sled over in deep snow. The revised bellypan shape allows the rider s feet to move 2 inches further forward for even greater ergonomic options for riding. The drive shaft dropped 1.125 inches allows for a 9.7º lowered approach angle providing more maneuverability and the ability to get up and stay up on the snow. Improved fit and finish with easy on/off one-piece body panels allow easy access to the engine compartment and brings a distinctive Arctic Cat styling. 8000 C-TEC2 ENGINE WITH DSI Introducing the most efficient and responsive 8000 engine from Arctic Cat. Fresh from our plant in St. Cloud, Minnesota, this 2-stroke engine features noticeably faster throttle response and acceleration compared with our previous 800, plus up to 30% reduction in oil consumption below 7000 rpm, 36% increase in low-end torque and 18% increase in midrange torque. Delivering a rare combination of increased power, reduced emissions, and ultra-low oil consumption, the overall crispness sets new standards for performance and rideability in the 160-hp class. 1.125" DROPPED DRIVESHAFT Like the 2017 Mountain Cat, this 2018 M 8000 Sno Pro is fitted with the 1.125" dropped driveshaft. The increased track-to-tunnel clearance of 3" allows us to use 8-tooth drive sprockets on this model, giving you a flatter approach angle with more floatability and maneuverability. In addition, you ll also notice a huge difference in your sled handling. This update delivers a more efficient power transfer to the snow, letting you enjoy more horsepower when climbing, carving, sidehilling and boondocking. ARCTIC MOUNTAIN FRONT SUSPENSION WITH FOX FLOAT 3 QS3 SHOCKS Lightweight, forged-aluminum spindles have less surface area than the previous design, reducing drag and improving performance in deep snow. Also, dual-phase high strength alloy-steel A-arms are lighter than previous designs. FOX FLOAT 3 QS3 shock lets you adjust your shocks to suit the riding conditions without removing your gloves. Set the clicker to 1 for a softer ride. Click it up a notch to setting 2, and you ll be able to take on any bump. Or click up to 3 for a stiffer ride to take on whatever the backcountry has to offer. FLOAT-ACTION REAR SUSPENSION WITH FOX FLOAT QS3 FRONT AND FOX FLOAT 3 QSL REAR SHOCKS The FLOAT-ACTION Rear Suspension features revised rails that shed 1.25 pounds, giving optimal suspension travel and a better ri
$12,699
Enumclaw Suzuki Kawasaki Yamaha Polaris
Enumclaw, WA
Stock Number: A1812